Antifreeze Fluid - 45 is a high-performance antifreeze. It uses an advanced formula that can provide freezing protection at - 45℃ and prevent boiling at around 130℃. is suitable for fuel vehicles and new energy vehicles. It has long-term protection, can prevent corrosion and scaling, and extend engine life. It has good compatibility with similar products and is widely suitable for various types of vehicles.
Antifreeze Fluid-45 leaks need to be handled in a timely and standardized manner to avoid environmental pollution and safety hazards. The following steps can be followed:
1. Safety protection:
Wear gloves, masks and other protective equipment before handling to prevent skin contact and inhalation of volatile gases, because its components contain a lot of ethylene glycol, which is toxic.
2. Control the scope of the leak:
Use sand, absorbent cotton and other absorbent materials to block the leaking area to prevent the antifreeze from spreading to a larger area, especially to avoid flowing into sewers, soil or water bodies.
3. Collect leaked liquid:
Use absorbent cotton, rags and other tools to absorb as much leaked Antifreeze Fluid-45 as possible, and seal the absorbed materials in a special container. If the leak is large, use a pump or siphon to collect the liquid into a leak-proof container.
4. Clean the contaminated surface:
Repeatedly rinse the contaminated ground and equipment surface with plenty of clean water to ensure that there is no residue. The wastewater after rinsing also needs to be collected and cannot be discharged directly.
5. Professional disposal:
Contact a local unit with hazardous waste disposal qualifications to recycle and process the collected leaked liquid and contaminated materials. Do not dump them on your own.
6. Check the system:
After cleaning, check the vehicle or equipment cooling system, find the cause of the leak, repair the damaged parts, and add enough Antifreeze Fluid-45 to ensure the normal operation of the cooling system.
LEANON Petroleum Technology has a strong technical team.The technical team has been engaged in the research and evaluation of lubricating oil for more than 15 years, and has accumulated a large amount of data on high-end products and racing oil. It can customize top-level experience products like Jin No.1 and racing oil for customers, and provide oil use schemes and suggestions to help solve problems in the process of using oil.
